Introduction; Intended Use; Warnings And Precautions; Warnings - ConMed Linvatec VP4726 Bedienungsanleitung

W41-147-004AA.book Page 1 Wednesday, February 18, 2009 2:47 PM
1.0

INTRODUCTION

I
t is recommended that personnel study this
manual before attempting to connect,
operate, adjust and/or clean the ConMed
Linvatec VP4726 and VP4726F Medical LCD
26" Monitors. The safe and effective use of this
equipment requires the understanding of and
compliance with all warnings, precautionary
notices, and instructions marked on the product,
and included in this manual.
The VP4726F Monitor is identical to the
VP4726 Monitor except it is equipped with
Optical input connectors. See "1.20 OPTICAL
(available on VP4726F Monitor Only)" on
page E-34 for connector information.
1.1

Intended Use

The VP4726 and VP4726F Medical LCD 26"
Monitors are used to display live and recorded
images captured with a medical grade camera
system or previously recorded using various
recording devices.
1.2

Warnings and Precautions

The words WARNING, PRECAUTION, and
NOTE carry special meanings and they should
be read carefully.
WARNING: The safety and/or health
of the patient, user, or a third party is at
risk. Comply with this warning to avoid
injury to the patient, user, or third party.
PRECAUTION: This contains
information concerning the intended use
of the device or accessory. Damage to
the equipment is possible if these instructions
are not followed.
NOTE: A note is added to provide additional,
focused, information.
1.2.1

Warnings

1. This equipment is designed for use
by medical professionals completely familiar
with the required techniques and instructions
for use of the equipment. Prior to using the
device, read and follow all warning and
precautionary notices and instructions
marked on the product and included in
this manual.
2. Do not attempt to open or service
the monitor, as this may void your
warranty. There are no user-
serviceable parts inside. Removing
the cover may introduce an electric
shock hazard by exposing you to dangerous
high voltages or other risks. If the system
malfunctions, return it for service
immediately.
E-1
E