ConMed Linvatec VP4726 Bedienungsanleitung Seite 24

W41-147-004AA.book Page 20 Wednesday, February 18, 2009 2:47 PM
Setup Menu
E
❶
LANGUAGE - Change the OSD language
(8 languages - Korean, English, French, Spanish,
German, Chinese, Japanese, Italian).
❷
OSD POSITION - Change the OSD position
(9 Positions).
❸
DURATION - Adjust time until the OSD Menu
will disappear after adjusting the duration
(5, 10, 20, 30, 60, 90, 120, 180, 240 seconds).
❹
RESET SETTINGS - Changes all the OSD values
to factory out-going status.
➎
AUTO SOURCE SELECT - Disable or enable
auto source select. (ON: Searches through all
possible input sources until an active video source
is found. OFF: Video input is manually selected.)
➏
USER NAME ENTRY - Change the name of a
Preset to the Users Name, etc.
PIP Menu
❶
LAYOUT - Changes the OSD layout (Single, PIP,
PBP1, PBP2).
For each LAYOUT selection, the following Sub-menus
are available:
❷
SOURCE - Changes the secondary source.
❸
SIZE - Changes the PIP size (Small, Medium,
Large).
❹
POSITION - Changes the PIP location.
➎
SWAP - Swaps the position and size of the Primary
and Secondary image.
E-20