ConMed Linvatec VP4726 Bedienungsanleitung Seite 26

W41-147-004AA.book Page 22 Wednesday, February 18, 2009 2:47 PM
Image Menu
E
❶
IMAGE SIZE - Change the image size
(Scaling mode) (Full; Fill aspect, 1:1; Normal).
❷
GAMMA - Adjust GAMMA value (VIDEO,
BYPASS, 1.8, 2.0, 2.2, 2.4, 2.6, PACS).
❸
FILTER - Set the sharpness of the image (Softest,
Soft, Normal, Sharp, Sharpest).
❹
OVER SCAN - Adjust the displayed size ( 0~8)
➎
IMAGE SETTING - Change the image setting
(Mode 1, 2, 3, 4, 5).
➏
ZOOM / PAN - Enlarge the image.
❼
FREEZE FRAME - Freezes the image.
Setup Menu
❶
LANGUAGE - Change the OSD language
(8 languages - Korean, English, French, Spanish,
German, Chinese, Japanese, Italian).
❷
OSD POSITION - Change the OSD position
(9 Positions).
❸
DURATION - Adjust time until the OSD Menu
will disappear after adjusting the duration
(5, 10, 20, 30, 60, 90, 120, 180, 240 seconds).
❹
RESET SETTINGS - Changes all the OSD values
to factory out-going status.
➎
AUTO SOURCE SELECT - Disable or enable
auto source select. (ON: Searches through all
possible input sources until an active video source
is found. OFF: Video input is manually selected.)
➏
USER NAME ENTRY - Change the name of a
Preset to the Users Name, etc.
E-22