Unpacking And Inspecting The Monitor; Returning The Monitor - ConMed Linvatec VP4726 Bedienungsanleitung

W41-147-004AA.book Page 6 Wednesday, February 18, 2009 2:47 PM
E 1.5 Unpacking and Inspecting the
Monitor
Upon receipt, carefully unpack the monitor and
accessories. Ensure contents are complete and
are free from damage. If any damage is noted
contact your ConMed Linvatec Customer
Service Representative. Save ALL packaging
materials; they may be needed to verify any
claims of damage by the shipper.
VP4726 / VP4726F LCD 26" Monitor:
• 1 - DVI Cable, 6 ft. (IM9021)
• 1 - BNC Cable (8175-06)
• 1 - AC Adapter (023933)
• 2 - DC Cable Terminal male / female
(Optional)
• 4 - Screws FH M4x12 (Screws for Vesa
mount - Optional)
• 2 - Ferrite Core,
ZCAT2035-0930A-M-K (Optional)
• 1 - Instruction Manual
The power cord is sold separately and is
packaged in a separate box.
• C7104 Power Cord — 115VAC
• C7105 Power Cord — 230VAC
1.6

Returning the Monitor

If it becomes necessary to return the monitor,
always use the original packaging. The
manufacturer does not take responsibility for
damage that has occurred during transportation
if the damage was caused by inadequate
transport packaging.
Contact ConMed Linvatec Customer Service for
Return Authorization PRIOR to shipping your
monitor for service.
Please make sure that all required information
has been supplied.
• Owner's Name
• Owner's Address
• Owner's Daytime Telephone Number
• Device type and model.
• Serial Number
• Detailed explanation of the damage.
E-6