Maintenance; Life Expectancy; Periodic Maintenance; Cleaning Instructions - ConMed Linvatec VP4726 Bedienungsanleitung

W41-147-004AA.book Page 35 Wednesday, February 18, 2009 2:47 PM
2.0

MAINTENANCE

Regular and proper maintenance of your
VP4726 and VP4726F Monitors is the best way
to protect your investment and avoid non-
warranty repairs.
Recommended care and handling of your
VP4726 and VP4726F Monitors includes proper
day-to-day operation and periodic inspection &
cleaning.
Your authorized ConMed Linvatec service
department is the most knowledgeable about the
ConMed Linvatec VP4726 and VP4726F
Monitors and will provide competent and
efficient service. Any services and/or repairs
done by any unauthorized repair facility may
result in reduced performance of the instruments
or instrument failure.
2.1

Life Expectancy

The standard warranty for this product is twelve
months. Life expectancy for the product is
expected to meet and exceed this period under
normal use and standard of care.
2.2

Periodic Maintenance

This product requires no periodic maintenance.
Occasional inspection of hardware interfaces is
recommended for high use connectors.
Periodically inspect for excessive wear or
damage to ensure effective data transfers.
Arrange for service if a connector is visibly
worn or damaged.
2.3

Cleaning Instructions

Follow universal precautions for protective
apparel when handling and cleaning
contaminated instruments.
1. Turn the monitor power off. Disconnect all
power cords and adaptors from the
electrical power source and from the rear of
the monitor.
2. Wipe monitor with a clean, soft cloth
dampened with a mild, pH- balanced
detergent.
3. Wipe again with distilled or sterilized
water.
4. Wipe dry with a clean, soft cloth.
E-35
E