Draught Settings - VDO Logic Log Depth Montageanleitung Und Bedienungsanleitung

BASIC SETTINGS
Draught setting (Draught)
The water depth can be displayed as an alternative to depth under the
keel.
The draught of the ship must be known if function "Depth" should display
the depth below the water surface.
Draught
Measure the distance bewteen the lowest point of the ship and the water
line, and program this value for function "Draught" as follows.
Example:
This example changes the draught from 0 m to 1.8 m. Pressing the
"CLEAR" key displays the keel depth value, 1.2 m in this example.
Setting a lower draught value than the keel depth is not possible.
Repeated hitting of the "UP ARROW" key sets the value to 1.8 m. This
69