Control Keys - VDO Logic Log Depth Montageanleitung Und Bedienungsanleitung

Control keys

62
FUNCTIONS
The " CLEAR " key
Use this key when programming the unit to reset va-
lues to zero. The navigation alarms can be activated
or deactivated.
The " UP ARROW " key
This key increases set values. A short tip will increase
the value by 0.1 or 1.0. The value will continuo usly in-
crement if the key is held down.
The " DOWN ARROW " key
This key decreases set values. A short tip will decrea-
se the value by 0.1 or 1.0. The value will continuously
decrement if the key is held down.
The " PROG " key
This key selects values for programming.
The " MODE " key
This key selects the values the LC display will show.
The " ENTER " key
This key terminates all programming functions and the
selection of the values which will be displayed.