Changing The Monitor Settings - HemoSense INRatio2 PT Benutzerhandbuch

EN
If you are using the external power supply, the monitor will stay on indefinitely.
10
NOTE: Turning the monitor OFF manually when it is not
being used will help conserve battery power. If you are using
battery power, and the monitor is left idle for about 10
minutes, the monitor will count down for about 10 seconds
and then turn OFF. Press any button to keep the monitor
turned ON and return to the previous monitor display.
(Example timeout when being
prompted to apply blood)

. Changing the Monitor Settings

Follow these steps to change the date, time, units (how you want your test results displayed),
and whether you want to set a target range for your results.
1. Press and hold the button to turn the monitor ON
The monitor will The monitor will begin
automatically perform a self preparing for a test for a few
test where all segments will seconds.
appear on the display.
NOTE: You may access Setup mode whenever your monitor is turned on, or after performing
a test.
2. Enter Setup mode
Press the Setup button to enter Setup mode.
The Setup symbol ( ) will appear on the display along with the year that's currently set in
the monitor.
NOTE: When you turn on the monitor for the first time, the date will be set to 01/01/2004
and the time will be set to 12:00.
The monitor will then
prompt you to insert a test
strip.
3. Select the desired format for displaying the date
Choose between MM/DD/YY or DD/MM/YY formats. The first 2
sets of digits (DD/MM or MM/DD) will be flashing on the display.
Use the and buttons to switch between date formats. Press
the button when you have the correct date format on the
display.
(Example MM/DD/YY format)
4. Set the year
The last 2 digits of the year will begin to flash on the display. Use
the and buttons to change the year. Press the
when you have the correct year on the display.
5. Change the month
The month will be flashing on the display. Use the and
buttons to change the month. Press the
have the correct month on the display.
6. Change the day
The day will be flashing on the display. Use the and buttons
to change the day.
Press the button when you have the correct day on the
display.
7. Select the desired format for displaying the time
of day
Choose between 12-hour (AM/PM) or 24-hour formats. The 2
digits next to "hr" will be flashing on the display. Use the and
buttons to switch between 12-hour and 24-hour time formats.
Press the button when you have the correct time format on
(Example 12-hour format)
the display.
EN
11
button
button when you