B) Checking The Drive Mechanics; C) Inserting The Flight Battery - Reely SKY 23 96 67 Bedienungsanleitung

b) Checking the Drive Mechanics

Before commissioning your model helicopter, you need to
check the drive mechanics.
Only if the mechanics work securely, without play and
absolutely smoothly can be model fly with the lowest possible
energy expenditure. For this reason, you should check the
model function before each flight.
For this, carefully turn the two main rotors back and forth
and check the interaction of the two main gears (1) and the
motor pinions (2).
The gears must securely fit into each other without catching
or showing too much friction.
The two motor shafts with the drive pinions must be aligned
perfectly straight and must not be eccentric.
The centrifugal weight rod (3) at the upper rotor must be
aligned precisely straight and its ends must be easy to move
up and down.
The linkage levers of the upper rotor (4) must not be difficult
to move or catch in any position.

c) Inserting the Flight Battery

The charged flight battery (1) is slid into the battery holder
(2) below the skid brackets.
The battery connection (3) must point backwards and the
two guide rails of the battery (4) must point up.
Slide the battery forwards as far as possible until the two
guide rails of the battery is flush with the rear holder.
42
Figure 10
Figure 11