d) Setting the Control Sensitivity
The remote control offers the option of increasing or reducing
control sensitivity if required.
When the control sensitivity (display indication „N") is
reduced, the model helicopter reacts with much smaller
movements to transmitter's control commands. This setting
is recommended for beginners.
If you are familiar with helicopter control and have the model
securely under control in all situations, you can switch on
full control sensitivity „H" and make use of your model's
maximum manoeuvrability.
When the transmitter is switched on, the reduced
control sensitivity „N" is set automatically.
The control sensitivity is switched with the control lever for
the pitch function.
If you push the control lever from above, the transmitter
issues a signal and the display indication switches from „N"
to „H".
Pushing the control lever again changes the setting back
to „N".
Figure 6
39