Reely SKY 23 96 67 Bedienungsanleitung Seite 45

Tail function (modes 1 and 2)
As the helicopter is equipped with two counter-rotating rotors, there is no torque around the yaw axis (rotor shaft). The
helicopter does not need a functional tail rotor for lateral stabilization.
To allow the model to turn around the yaw axis (rotor shaft), the two main rotors run at slightly different speeds (see
figure 16).
The tail function is controlled with the left control lever in modes 1 and 2. If the lever is pushed slightly towards the left,
the tip of the fuselage turns towards the left. If you steer towards the right, the tip of the fuselage turns likewise towards
the right.
Roll function (modes 1 and 2)
The roll function allows you to move your model helicopter sideways to the right and to the left (see figure 17). Control
is carried out with the right control lever in modes 1 and 2.
If the lever is steered slightly towards the left, the model drifts sideways to the left. If you steer to the right, the model
drifts sideways to the right.
Figure 16
Figure 17
45