G) Mounting The Drive Engine - Reely SKY Air Lady Bedienungsanleitung

g) Mounting the drive engine

• Under the Conrad order no.: 234261 a drive motor (1)
especially adjusted to the Air-Lady model is provided.
This drive motor is simply slotted onto the square engine
mountings (2) and secured with the supplied locking
screw (3).
In order to prevent a splitting of the square engine
mounting, prebore the hole for the locking screw with a
small drill.
• Then push the square engine mounting from the front
into the prepared opening in the motor and cockpit
frame.
The distance between the engine mounting (4) and the
engine frame (5) should be approx. 8 mm.
• Then glue the square motor engine with thickened 2-
component epoxy glue or PVAC glue on the engine and
cockpit frame.
46
Figure 9