Denon DVD-1600 Bedienungsanleitung Seite 21

Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a
minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for
instructions.
Reference pages are shown as black circled numbers O.
Power
Ope_tion
No operations can be
)erformed with the remote
control.
Alternative languages fail to
be selected.
Soundtrack and/or subtitle
language is not the one
selected with the SETUP
menus.
• Check the batteries are installed correctly. O
oThe batteries are depleted: Replace them with new ones. Q
oPoint the remote control at the remote control sensor and operate. O
oAn altemafive language is not selected with discs which do not contain more than one language.
eln the case of some discs, the alternative language cannot be selected with [AUDIO] or [SUBT]TLE]. Try
selecting it from the disc's menu if one is available.
• The language is not recorded on the disc.
Sound
No sound.
Disto_edsound.
oCheck the connections. O _) _)
oCheck the volume on the equipment you have connected.
oEnsure that the input settings for the television and stereo system are correct.
olf you have connected this unit to an amplifier through the AUDIO OUT (5.1 ch) terminals, go to the Audio
menu in the SETUP menus, and change "Speaker Setting" to suit your speakers. Select the large or
small icon for all the speakers you have connected. _)
eTurn V.S.S. off if it causes distortion. _)
eOutput from this unit will be in stereo (two channels) when V.S.S. is on. Turn V.S.S. off if you are using
three or more speakers. _)
oDue to the specifications on some types of televisions, both video and audio may be cut off when you
turn the AUDIO ONLY feature on. _1
• If the "D.MIX" indicator on the FL display goes out while playing a multi-channel DVD-Audio disc, sound
will only be output from speakers specified by the disc. Read the disc's instructions for details.