Flyer C SERIE Originalbetriebsanleitung Seite 403

Setting of [BRIGHTNESS]
The brightness can be adjusted in five stages
from OFF (no backlight), and level 1 to level 4.
One bar is displayed at level 1, three bars are dis-
played at level 2, six bars at level 3, and nine bars
at level 4. e.g. You want to change the brightness
from the level 4 to level 2.
Fig. 1
Fig. 2
Fig. 3
1) Hold down the [MODE] button and the as-
sist mode select button () on the operation
unit until [LANGUAGE] is displayed at Text
indication on the display unit. (Fig. 1)
2) Press the assist mode select buttons
(/) to select [BRIGHTNESS] and press the
[MODE] button to set [BRIGHTNESS]. (Fig. 2)
– The screen for level 4 is displayed.
3) Press the assist mode select buttons (/)
to select the brightness you want to change,
and press the [MODE] button to fix the bright-
ness. (Fig. 3)
– The screen for level 2 is displayed.
– When holding down the assist mode select
buttons (/) for two seconds, the display will
change fast.
– The set brightness is reflected on the display
unit.
4) Press the night mode button.
– The changed setting is stored in memory on
the display unit.
Note
– Backlight setting has a normal mode and night
mode. The corresponding backlight setting will
change depending on whether the light turns
on or off.
Setting of [UNIT]
e.g. You want to change the unit display from kilo-
meters to miles.
Fig. 1
Fig. 2
Fig. 3
1) Hold down the [MODE] button and the as-
sist mode select button () on the operation
unit until [LANGUAGE] is displayed at Text
indication on the display unit. (Fig. 1)
2) Press the assist mode select buttons (/)
to select [UNIT] and press the [MODE] button
to set [UNIT]. (Fig. 2)
3) Press the assist mode select buttons (/)
to select the mile display, and press the
[MODE] button to fix the mile display. (Fig. 3)
4) Press the night mode button.
– The changed setting is stored in memory on
the display unit.
EN-26