Flyer C SERIE Originalbetriebsanleitung Seite 160

If the brake system needs to be cleaned, contact
your FLYER specialist retailer. The component
manufacturer's instructions on how to clean the
brake system are provided in the respective brake
system manual.
Only allow your FLYER
maintain the brake system and change individual
brake system components. Only original spare
parts may be used. Otherwise it is possible that
the functionality of your FLYER e-bike may be im-
pacted or damaged.
Have the brake pads regularly checked accord-
ing to manufacturer specifications by your FLYER
specialist retailer.
It is essential to switch off the electrical
operating system and remove the bat-
tery before any form of maintenance
work is carried out.
1
Switch off the operating system
2
Removing the battery
3
Performing maintenance work
Maintenance work on the brakes must
be undertaken by a FLYER specialist.
Liquids containing oil may never be ap-
plied to brake pads, brake surfaces of
the rim, brake blocks or brake discs.
These substances reduce the effective-
ness of the brakes.
specialist retailer to
Do not drive when brake pads, brake
blocks, brake discs or rims are polluted
with lubricant. Dirty pads and blocks
must be replaced and dirty rims and
brake discs must be cleaned.
Only original spare parts may be used
when changing the brakes.
158