KEB COMBIVERT F4-F Betriebsanleitung Seite 53

2.3. Parameter Interface
Operator
only optional
5 4 3 2 1
9 8 7 6
An operator is a necessary accessory for local operation of the
inverter COMBIVERT F4. To prevent maloperation, the inverter
must be brought into the nOp status (control release terminal X2.1)
before it is connected/disconnected.
The operator is available in several versions:
Digital-Operator
Part No. 00.F4.010-2009
5-digit LED display
Operator Panel
Interface-Operator
Part No. 00.F4.010-1009
An isolated interface RS232/RS485 is additionally integrated into
the Interface Operator.
PE-Connection
PIN RS485 Signal Description
1 – –
2 – TxD
3 – RxD
4 A' RxD-A receiving data A / RS485
5 B' RxD-B receiving data B / RS485
6 – VP
7 C/C' DGND Data ground
8 A TxD-A transmission data A / RS485
9 B TxD-B transmission data B / RS485
Information about other operators available from KEB!
2. Connection
Operation / error display
Normal:
Error:
RS232/RS485
reserved
transmission data / RS232
receiving data / RS232
supply voltage plus +5V (I
ANTRIEBSTECHNIK
GB
LED on
LED blinks
=10 mA)
max
GB 11