Drive-Mode; Adjustment Possibilities; Condition; Display And Keyboard - KEB COMBIVERT F4-F Betriebsanleitung

5. Drive-Mode

5. Drive-Mode
5.1 Adjustment
Possibilities
GB

5.2 Condition

5.3 Display and
Keyboard
5.4 Setvalue Display /
Setvalue presetting
GB 36
The Drive-Mode is a special operating mode in KEB COMBIVERT. It
allows an easy manual start-up. To activate the Drive-Mode enter the
respective password in CP.0.
The passwords are found on page GB 43 !
– Stop / Start / Run
– Setpoint value
– Direction of rotation
Control release must be activated (terminal X2.1)
When the functions rotation release (terminal X2.3 / X2.4)
and analog torque control (terminal X2.16 / X2.17) are
activated, they still don't have a function in the Drive-Mode.
Rotation Indicator
Interface control
LED "flickers" as soon
as the inverter sends
data
START
ENTER FUNC.
F/R SPEED
STOP
Hold the SPEED-key pressed down
and decrease the indicated setvalue
with the STOP-key.
START
ENTER FUNC.
F/R SPEED
STOP
The defined setvalue is
displayed until the SPEED-key
is pressed.
START
ENTER FUNC.
F/R SPEED
STOP
Setvalue input :
0 – max. 6 000 rpm
Hold the SPEED-key pressed down
and increase the indicated setvalue
with the START-key.
Displays Operating Mode /
Actual speed / set speed
Operation / Error display
No error: "LED on"
Error: "LED blinks"
Operator Panel
START
ENTER FUNC.
F/R SPEED
STOP