Application; Moving Or Rotating Parts; High Operating Temperatures; Connection Instructions - KEB COMBIVERT F4-F Betriebsanleitung

1.1 Application

1.2 Moving or Rotating
Parts
1.3 High Operating
Temperatures
°C
100
0

1.4 Connection Instructions

1. Operating Specifications
The frequency inverter KEB COMBIVERT F4-F is a drive component,
which is intended for installation in electrical systems or machines.
The frequency inverter is exclusively for stepless speed control/
regulation of three-phase asynchronous motors. The operation of
other electrical consumers is not permitted and can lead to the
destruction of the unit.
• Motor shaft
• Feed axis and parts connected to it
Prior to any work on the machine (e.g. exchange
of tools), disconnect it and secure against
unintended restart!
Safely secure movement range of machine during
operation! Danger of injury!
• Housing of the motor
• Braking resistors
Motor housing and braking resistor can attain
very high temperatures! Danger of injury!
A trouble-free and safe operation of the frequency inverter is only
guaranteed when the following connection instructions are observed.
When deviated from, malfunctions and damages may occur in
isolated cases.
- The frequency inverter KEB COMBIVERT is only designed for a
stationary connection.
- Do not interchange power cables and motor lines.
- Install control and power lines separately (min. 10 cm distance).
ANTRIEBSTECHNIK
GB
GB 5