Installing The Comfortel Set Configuration Software - Auerswald Comfortel 2600 Inbetriebnahmeanweisungen

Commissioning
1.
Switch the PC on.
2.
Insert the CD (Auerswald Mega Disk) into the CD ROM disk drive.
3.
If the CD does not start automatically, click successively Start > Run.
4.
Click Browse and open the corresponding CD-ROM drive. Double-click the
autostart.exe application in the main directory. Click on OK.
5.
Follow the instructions on the screen by repeatedly clicking Next and se-
lecting the COMfortel 2600.
6.
Continue following the instructions on the screen and select the TAPI
driver.
7.
Follow the instructions on the screen.

Installing the COMfortel Set Configuration Software

Requirements
– The Auerswald Mega Disk included in the package
– A PC with the following features:
– Active connection of the PC to one of the following interfaces:
56
Intel Pentium 800 MHz or compatible processor
Windows XP (as of Service Pack 3), Windows Vista 32/64-bit (as of Ser-
vice Pack 2), Windows 7 32/64-bit, Windows 8 32/64-bit, Mac OS X (as
of 10.5), Linux (as of Kernel 2.6)
Memory (RAM: 256 MB, recommended 512 MB;
for Windows Vista/Windows 7/Windows 8: 1 GB, for 64-bit, 2 GB
37 MB free hard disk space for COMfortel Set
85 MB free hard disk space for Java Runtime
USB interface (if needed): USB specification 1.1 or 2.0
CD-ROM drive
Mouse or compatible pointing device
SVGA graphics card with a resolution of 800 x 600;
recommended 1024 x 768 and 65536 colours (16 bit)
USB interface of the telephone (only COMfortel 2600; see
PC-port on the PBX (see the instructions of the PBX)
COMfortel 1600/2600 - Firmware Version 1.2A - COMfortel Set 3.4 - Setup V04 09/2013
Page 54)