Proper Use - Auerswald Comfortel 2600 Inbetriebnahmeanweisungen

Proper Use

Important: Auerswald products are not designed, manufactured, or
intended for use or resale in environments requiring fail-safe performance,
such as in the operation of life-support systems and/or nuclear facilities.
Use of our products for these purposes is only allowed with prior written per-
mission by Auerswald for each individual incident.
Important: Improper use may cause, for example, functional restrictions or
interference, the destruction of the device or, in a worst case scenario, per-
sonal injury.
The COMfortel 1600 and 2600 are system telephones. System telephones are
intended exclusively for connecting to an internal S
PBXs from Auerswald:
Important: To support the COMfortel 1600/2600 system telephones the
PBXs require at least the following firmware version:
Note: Connecting to a PBX from another manufacturer or to the external S
connection of a network provider is not intended.
The telephones are corded and are intended for use in closed, dry rooms.
The system telephones are different from standard telephones connected to
Auerswald PBXs in that they are especially easy to use, among other things.
Most of the functions available on the PBXs such as internal and external calls,
Do-not-Disturb and call forwarding can be operated over the display or by sim-
COMfortel 1600/2600 - Firmware Version 1.2A - COMfortel Set 3.4 - Setup V04 09/2013
If you are still not sure of the intended use of the product after reading
the following section, please contact your specialised dealer.
Read the instructions for the device and keep them for future reference.
COMpact 3000
COMpact 2206 USB
COMpact 4410 USB
COMpact 5010 VoIP
COMpact 5020 VoIP
COMmander Basic.2 (19")
COMmander Business (19")
COMmander 6000/R/RX
COMpact 3000: 4.0I
COMpact 2206 USB and COMpact 4410 USB: 2.4A
COMpact 5010 VoIP, COMpact 5020 VoIP, COMmander Basic.2 and
COMmander Business: 4.2A
COMmander 6000/R/RX: 5.4B
Important Information
or U port of the following
0 P0
0
37