Connecting The Receiver - Auerswald Comfortel 2600 Inbetriebnahmeanweisungen

Preparation
9.
Repeat steps 5. and 6. for the connected key extension modules.
10.
Remove the bridge plug from the jack labelled with
of the telephone.
11.
Insert the RJ-45 connector of the power supply into the jack labelled with
Do not connect to the 230 V mains supply before the telephone is actually
commissioned.
Fig. 8: Assembling and connecting the COMfortel Xtension300 key exten-
sion modules
Warning: Using the wrong power supply plug can result in a life-threatening
electric shock or can damage or destroy or the device.

Connecting the Receiver

1.
Insert the RJ-10 connector at the longer, plane end of the spiral cord into
the jack labelled with
46
on the lower side of the telephone.
For this reason, only use a power plug of type no. FW7577/EU/40.
COMfortel 1600/2600 - Firmware Version 1.2A - COMfortel Set 3.4 - Setup V04 09/2013
on the lower side of the telephone.
on the lower side