Configuring The Telephone Via The Configuration Manager - Auerswald COMfortel 3500 Inbetriebnahmeanleitung

Configuring the Telephone via the Configuration Manager

Requirements
– Existing network connection between the PC and the telephone
– Knowledge of the IP address of the telephone (can be queried under All
apps > Settings > Ethernet)
– For the operation as system telephone: Knowledge of the admin username
and of the admin password of the Auerswald PBX
Steps to Take
1.
Start a browser (for example, Mozilla Firefox).
2.
Enter the IP address of the telephone in the address field/address bar of the
browser (for example, http://192.168.178.4).
Note: If operated as standard VoIP telephone: If you start the configuration
manager for the first time, a dialogue box will be opened in a first step which
serves to set the username and the user password. Enter these parameters
as requested.
3.
Under Username and Password, enter the following parameters.
COMfortel 3200/3500 - Firmware Version 1.8B - Setup Guide 04 02/14
The login window opens.
If operated as a system telephone: the admin username and the admin
password of the PBX.
If operated as standard VoIP telephone: the username and the pass-
word for the telephone.
Commissioning
67