Data For Connecting A Headset - Auerswald Comfortel 2600 Inbetriebnahmeanweisungen

Important Information
Important: If using the PBXs COMmander Basic.2, COMmander Business
and COMmander 6000/R/RX, the max. power distribution also includes the
a/b ports. For each connected analogue subscriber, you must deduct 1 W
from the max. power distribution.
PBX
COMpact 3000
COMpact 2206 USB
COMpact 4410 USB
COMpact 5010 VoIP
COMpact 5020 VoIP
COMmander Basic.2 (19")
COMmander Business (19")
COMmander 6000/R
COMmander 6000 RX
Important: Only available for operation on the PBXs COMmander 6000/R/
RX (with Firmware 6.0A or later): The COMfortel 2600 allows the simulta-
neous connection and recording on the local answering machine during a
call. It is necessary to have access to both voice channels of the internal S
ports for these two connections. To guarantee this, you have to use only
one telephone per port.

Data for Connecting a Headset

Microphone power consumption
Microphone sensitivity
Loud speaker impedance
Loud speaker sensitivity at 1 kHz
Sound pressure limit
Headset jack pin-out
1
2
3
4
40
COMfortel 1600
Microphone -
Loudspeaker -
Loudspeaker +
Microphone +
COMfortel 1600/2600 - Firmware Version 1.2A - COMfortel Set 3.4 - Setup V04 09/2013
Max. power distribution of
the total of all internal
S and U ports
0 P0
2.5 W
4 W
12 W (4 W per port)
8 W (4 W per port)
24 W (4 W per port)
60 W (4 W per port)
160 W (4 W per port)
60 W (4 W per port)
160 W (4 W per port)
Max. 0.5 mA
45 dB
150 Ohm
19.5 3 dBPa/V
24 dBPa
Max. no. of COMfortel 1600
and COMfortel 2600 without
wall-mounted power supply
1
2
6 (2 telephones per port)
4 (2 telephones per port)
12 (2 telephones per port)
30 (2 telephones per port)
80 (2 telephones per port)
30 (2 telephones per port)
80 (2 telephones per port)
0