Appendix; Querying The Firmware Version/Serial Number; Performing A Firmware Update - Auerswald Comfortel 2600 Inbetriebnahmeanweisungen

Once you have put your telephone into operation and configured it, check this section on
operation and configuration for additional useful information.

Querying the Firmware Version/Serial Number

1.
Press the menu key.
2.
Tap on information.
3.
Scroll to the selection version.
4.
Scroll to the selection serial number.

Performing a Firmware Update

Important: Only available for operation on the PBXs COMpact 3000,
COMpact 5010 VoIP, COMpact 5020 VoIP, COMmander Basic.2, COM-
mander Business and COMmander 6000/R/RX. On the other PBXs a man-
ual firmware update can be performed instead.
Requirements
– The PBX connected to broadband Internet access
– The address of the update server configured in the PBX
– A DNS server and, if necessary, an HTTP proxy server configured in the
PBX
1.
Press the menu key.
2.
Tap successively on settings > synchronisation > firmware update.
3.
Confirm the message:
COMfortel 1600/2600 - Firmware Version 1.2A - COMfortel Set 3.4 - Setup V04 09/2013

Appendix

The firmware versions of the telephone and the PBX are displayed.
The serial number of the telephone is displayed.
The firmware update is performed. After this, a message appears in the
display indicating whether the update was successful.
Comfortel 1600: Tap on
Comfortel 2600: Tap on OK.
.
Appendix
59