Installing Battery; Charging Handset - Auerswald comfort dect 610 Bedienungsanleitung

Installing Battery

The rechargeable Ni-MH battery comes with your
phone. Install the battery before using your phone.
1. Slide the battery cover in the direction of
the arrow, and pull it out.
2. Remove the old battery, if any, plug the
battery connector into the socket on the
bottom and insert the battery.
3. To replace the battery cover, slide the
cover up until it snaps shut.

Charging Handset

Before initial operation, YOU SHOULD FULLY CHARGE
THE HANDSET for more than 12 hours.
To charge the handset, simply place it on the
charger.
Result: When charging, the handset is automatically
turned on and a lamp on the base/charger
lights up.
B U
EFORE SING
8
Battery connect
.
socket
N N o o t t e e : : The battery needs to be replaced if it does not
recover its full storage capacity after recharging.
You should use a RECHARGEABLE battery only.
The lamp lights
while charging.