SEW-Eurodrive MOVIDRIVE MDX61B Handbuch Seite 48

I
DP-V1-Funktionen
6
Struktur des DP-V1-Parameterkanals
0 0
PROFIdrive Return
Codes für DP-V1
48
Diese Tabelle zeigt die Kodierung der Error Number in der PROFIdrive-DP-V1-Parame-
ter-Antwort nach PROFIdrive-Profil V3.1. Diese Tabelle gilt, wenn die PROFIdrive-
Dienste „Request Parameter" bzw. „Change Parameter" verwendet werden.
Error No. Meaning
0x00 Impermissible parameter
number
0x01 Parameter value cannot be
changed
0x02 Low or high limit exceeded
0x03 Faulty subindex
0x04 No array
0x05 Incorrect data type
0x06 Setting not permitted (can
only be reset)
0x07 Description element cannot
be changed
0x08 reserved
0x09 No description data avai-
lable
0x0A reserved
0x0B No operation priority
0x0C reserved
0x0D reserved
0x0E reserved
0x0F No text array available
0x10 reserved
0x11 Request cannot be exe-
cuted because of operating
state
0x12 reserved
0x13 reserved
0x14 Value impermissible
0x15 Response too long
0x16 Parameter address imper-
missible
0x17 Illegal format
Handbuch – MOVIDRIVE® MDX61B Feldbusschnittstelle DFP21B PROFIBUS
Used at
Access to unavailable parameter
Change access to a parameter value
that cannot be changed
Change access with value outside the
value limits
Access to unavailable subindex
Access with subindex to non-indexed
parameter
Change access with value that does not
match the data type of the parameter
Change access with value unequal to 0
where this is not permitted
Change access to a description element
that cannot be changed
(PROFIdrive Profile V2: PPO-Write
requested in IR not available)
Access to unavailable description (para-
meter value is available)
(PROFIdrive Profile V2: Access group
wrong)
Change access without rights to change
parameters
(PROFIdrive Profile V2: wrong pass-
word)
(PROFIdrive Profile V2: Text cannot be
read in cyclic data transfer)
(PROFIdrive Profile V2: Name cannot be
read in cyclic data transfer)
Access to text array that is not available
(parameter value is available)
(PROFIdrive Profile V2: No PPO-Write )
-
Access is temporarily not possible for
reasons that are not specified in detail
(PROFIdrive Profile V2: other error)
(PROFIdrive Profile V2: Data cannot be
read in cyclic interchange)
Change access with a value that is within
the value limits but is not permissible for
other long-term reasons (parameter with
defined single values)
The length of the current response
exceeds the maximum transmittable
length
Illegal value or value which is not sup-
ported for the attribute, number of ele-
ments, parameter number or subindex or
a combination
Write request: Illegal format or format of
the parameter data which is not suppor-
ted
Supplem. Info
0
Subindex
Subindex
Subindex
0
0
Subindex
Subindex
-
0
-
0
-
-
-
0
0
Subindex
0
0
0