Yamaha CDR-HD1000 Bedienungsanleitung Seite 20

BASIC RECORDING OPERATION
3.
Rotate the MULTI JOG knob (press +/– on the remote
control) to adjust the recording level.
Adjustment is possible in the –12dB to +12dB range by 0.4dB
steps. When the level is set to a value other than 0dB, the VAR
indicator lights on the display.
L
dB –30 –10 –6
R
Adjust the recording level so that the red part on the peak level
meter does not light at the loudest sound levels.
L
dB –30 –10 –6
R
4.
Press the MULTI JOG knob (ENTER on the remote
control) to return to the previous display.
Notes
• The recording level can be adjusted while this unit is in either
the recording or recording pause mode. Once recording has
been stopped, the recording level is reset to 0dB.
• Adjustment of the recording level can be canceled by
pressing MENU when the level is adjusted in the recording
pause mode.
• The recording level is set to 0dB by pressing CLEAR when
the level is adjusted in the recording pause mode.
18
E-
GROUP
–2 0
CD–RW VAR
GROUP
–2 0
CD–RW VAR
I When recording an analog input source
ER CDR–HD1000
COPY
1.
Play the loudest passage (highest sound level) of the
source to be recorded.
2.
Adjust the recording level by rotating the ANALOG
REC LEVEL control.
Rotate the control clockwise to increase the level and
counterclockwise to decrease the level.
Adjust the recording level so that the red part on the peak level
meter does not light at the loudest sound levels.
Note
• The recording level can be adjusted while this unit is in either
the recording or recording pause mode.
MULTI JOG
PUSH ENTER
TEXT/TIME MODE/SET MENU
TRACK NO. COMPLETE CLEAR
BOOKMARK
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
REC FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN MAX
2