Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
en
, Explanation of the symbols on the appliance or accessory
Follow the instructions in the operating instructions.
Caution! Rotating blades.
Caution! Rotating tools.
Do not place fingers in the feed tube.
The operating instructions describe different
models with different accessories.
Please keep the operating instructions
in a safe place. If passing on the appliance
to a third party, always include the operating
instructions.

Overview

Please fold out the illustrated pages.
Base unit
1 Rotary switch
0 = Stop
M = Instantaneous switching (Maximum
speed hold down the rotary switch)
Settings 1–2, Operating speed:
1 = low speed
2 = high speed.
2
Drive cover
Attach when blender is not in use.
3
Cord store
4
Ventilation slots
5
Suction feet
Attach the appliance to a smooth and clean
surface.
Bowl with accessories/tools
6
Bowl
Attach and rotate as far as possible
in a clockwise direction (lug on bowl
in slot on base unit).
7a Lid
Attach lid (arrow on the lid on the arrow on
the handle) and rotate as far as possible
in a clockwise direction (lid lug in slot
on base unit, arrows on lid and housing
match up).
b Feed tube
Remove the push block and add more
ingredients.
c Push block (= measuring jug)
Push down food which is to be sliced
or shredded.
14
8a Fly cutter
b Whipping (beating) disc
9a Disc holder
for holding the discs.
b Reversible slicing disc – thick/thin
c Reversible shredding disc – coarse/fine
Available from a specialist outlet if not included
with the appliance.
d Slicing/Shredding disc
e Chipper disc
Blender
10 Blender jug
Attach and rotate as far as possible
in an anti-clockwise direction.
11a Lid
Attach and lock in position by rotating
in an anti-clockwise direction.
b Feed tube
Remove the funnel and add more
ingredients.
c Funnel
Add more liquid.

Operation

Before operating the appliance and accesso-
ries for the first time, clean thoroughly; see
"Cleaning and servicing".
Preparation
Place the base unit on a smooth, clean
surface. Do not cover ventilation slots.
Insert the plug.
Robert Bosch Hausgeräte GmbH

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Mcm21.. series

Inhaltsverzeichnis