Drive Cover; Cleaning And Servicing; Cleaning Products; Cleaning The Base Unit - Bosch 8 OptiMUM Serie Gebrauchsanleitung

Press the release button and push
5.
the swivel arm down until it en-
gages.
Process the ingredients until you
6.
achieve the required result.
Using instantaneous switching
Set the rotary switch to
1.
hold.
→ Fig. 18
a The ingredients are processed at
maximum speed.
Release the rotary switch.
2.
→ Fig.
19
a The rotary switch springs to
a Processing stops.
Tip
Instantaneous switching is especially
suitable when using the following
accessories:
¡ Glass blender attachment
¡ Multi-chopper set
¡ Multi-blender attachment
7.12 Drive cover
Remove the protective cover to use
accessories on drive 2 or 3.
Removing drive cover
Lift the protective cover of drive 2
▶
or 3 by the side lug lift and re-
move.
→ Fig. 20
Fitting drive cover
▶ Position the protective cover of
drive 2 or 3 and press down firmly.
→ Fig. 21
8 Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
8.1 Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
and
incorrect cleaning may damage the
appliance.
▶
▶
▶
⁠ .
8.2 Cleaning the base unit
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
▶
▶
1.
2.
3.
8.3 Overview of cleaning
You can find an overview of how to
best clean the appliance and the
other parts here.
→ Fig.
Tip: When processing food such as
carrots, plastic parts may become
discoloured. Remove discolouration
with a soft cloth and a few drops of
cooking oil.
Cleaning and servicing en
Do not use cleaning agents con-
taining alcohol or spirits.
Do not use sharp, pointed or metal
objects.
Do not use abrasive cloths or
cleaning agents.
WARNING
Never immerse the appliance or
the power cord in water or clean in
the dishwasher.
Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
Remove the drive covers.
Wipe the base unit and drive cov-
ers with a soft, damp cloth.
Dry the base unit and drive covers
with a soft cloth.
22
35