G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung Seite 79

Use the USB-AM/BM-2 cable to connect one of the computer's USB
USB 2.0 CPU:
interfaces to this interface.
IMPORTANT: Transmitting data of USB 2.0 devices connected to the USB 2.0 Devices
interface of the user module between the user module and the computer module
(and vice versa) requires transmission modules that use laser technology and com-
ply with laser class 1.
Please note the following safety instructions regarding this matter:
 Only use G&D certified transmission modules on page 2
USB 2.0 Trans.|Tx: Insert the LC plug of a fibre optic cable, which is available as
accessory, into this interface. Connect the other end to the
face of the user module.
Insert the LC plug of another fibre optic cable into this interface.
USB 2.0 Trans.|Rx:
Connect the other end to the
Optional: Connecting a local console
USB 2.0 CPU USB 2.0 Trans.
NOTE: The keyboard of the local console can either be a PS/2 or a USB device.
ADVICE: Use the adapter
USB mouse at the same time.
Keyb./Mouse: Connect the mouse and/or the keyboard of the local console to this
interface.
Connect the monitor of the local console to this interface.
DisplayPort Out:
NOTE: One DisplayPort Out
nel variants. The number behind the name of the interface assign each interface to
a particular channel.
USB 2.0 Trans.|Tx
In Line
Out
Transmission CPU DisplayPort 1
(A6400043) to use a PS/2 keyboard and a
MD6M-2xMD6F
interface is available for every video channel of multi-chan-
USB 2.0 Trans.|Rx
interface of the user module.
RS232
Red. Power
Keyb./Mouse
Out Keyb. CPU Mouse USB CPU
G&D DP-Vision-Fiber · 8
Installation
inter-