Changing The Exclusive Key - G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung

Configuration

Changing the exclusive key

After pressing the hotkey for the exclusive operation of the extender the input
devices of the concurrent console are disabled. Only after pressing the hotkey again
at the active console the KVM extender can again be operated by both consoles.
The hotkey for the exclusive operation consists of at least one hotkey modifier (see
Changing hotkeys on page 26) and an exclusive key. Both keys can be selected from a
number of available keys. You can change both the hotkey modifier
exclusive key
Print
How to change the exclusive key:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under Exclusive key
Backspace
PrtSc
Scroll
Num
Pause
Insert
Delete
Home
End
PgUp
PgDn
Space
5. Press to save your settings.
F2
1. Click on
KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click the General
4. Under Exclusive mode actionkey
Backspace, PrtSc, Scroll, Num, Pause, Insert, Delete, Home, End, Page Up, Page
Down and Space.
5. Click OK to save your changes.
29 · G&D DP-Vision-Fiber
.
(default) to open the on-screen display.
System setup and press
Hotkey and press
press F8 to select on of the following options:
 Backspace key
 Print key (default)
 Scroll key
 Num key
 Pause key
 Insert key
 Delete key
 Home key
 End key
 Page Up key
 Page Down key
 Space key
tab.
Enter .
Enter .
on the directory tree.
select one of the following keys:
and the
Ctrl