Information Display - G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung

Information display

Information displays are shown temporarily (5 seconds) in the upper left corner.
ADVICE: If the temporary information display is active, you can press the hotkey
Ctrl+Caps Lock to repeat the caption.
The information display can also be shown permanently or it can be disabled
How to change the setting of the information display:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under Display
Off  information display is turned off
 information display is shown temporarily for 5 seconds (default)
Temporary
Permanent  permanent information display
5. Press to save your settings.
F2
1. Click on KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
4. Under Display
 information display is turned off
Off
Temp  information display is shown temporarily for 5 seconds (default)
 permanent information display
Perm
5. Click OK to save your changes.
(default) to open the on-screen display.
and press
Console setup
and press
Personal Profile
press F8 to select between the following options:
Remote > Extender system > Personal profile
select one of the following options:
.
Enter
.
Enter
on the directory tree.
.
G&D DP-Vision-Fiber · 46
Configuration