Switching Power Outlets - G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung

ADVICE: In the standard configuration of the KVM extender, the computer's
video signal is output at the active as well as the concurrent console monitor.
If necessary, change the video modes of the user modules (see page 32) to switch
off the image of the concurrent console while you operate the extender at the
other console.
 Right for exclusive access to the console on page 30
 Changing the video mode of consoles on page 32
 Changing the exclusive key on page 29

Switching power outlets

A compatible power switch (
the power supply of devices by using the KVM extender.
IMPORTANT: The configuration of power switches and the assignment of power
outlets is carried out in the web application
How to switch the power outlets assigned to the KVM extender:
1. Use the hotkey Ctrl+Num
2. Use the
arrow keys
NOTE: If the computer module is not assigned with at least one power outlet,
this entry cannot be selected and the text
3. Press Enter to carry out one of the following options:
 turn power outlet(s) off
turn off
turn on  turn power outlet(s) on
ePowerSwitch 1G R2
(default) to open the on-screen display.
to select the row
Target Power
, and
4M+ R2 8M+ R2
Config Panel .
.
n.c. (not connected) is shown instead.
G&D DP-Vision-Fiber · 18
Operation
) lets you switch