Operating The On-Screen Display - G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung

Configuration
Header  The header shows the title of the current menu.
List field 
The list field shows the menu items of the selected menu.
there are two types of menu items:
 Menu items with submenus:
 Menu items without submenus:
Footer  The footer shows the most important keys to operate the cur-
rently displayed menu and further information if available.

Operating the on-screen display

The on-screen display is operated with the console keyboard. The following table
shows you a list of frequently used keys:
Arrow keys:
Enter:
Esc:
Tab key:
F2:
F8:
Ctrl+F8:
23 · G&D DP-Vision-Fiber
These items are displayed with three dots (...) in the right col-
umn. Select these items with the
open the submenu.
The current setting is shown behind the menü item and can be
changed directly.
Press the arrow keys
Right ) to move the cursor between the different menu items.
Use this key to confirm inputs of open a submenu.
This key closes the displayed menu and shows the superior
menu.
A message is shown if entries are changed but not saved.
Use this key to move the cursor within the list field from one
menu item to the next (or vice versa).
Press this key to save your settings.
The displayed menu closes after the settings are saved and the
superior menu is displayed again.
Press this key to switch between the different options of a menu
item.
Configuration settings with many options support this hotkey
to open a clearly-arranged list containing all options.
arrow keys
Up and Down (in some menus also
and press to
Enter
Left and