Opening The On-Screen Display Via Double Keypress - G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung

Opening the on-screen display via double keypress

As an alternative to opening the on-screen display (OSD) with the hotkey
key+Num or Double hotkey+Num
key twice.
How to enable/disable the activation of the on-screen display via double key-
press:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under OSD via 2x keypress
Off  OSD cannot be opened via double keypress (default)
 OSD is opened by pressing the Ctrl key twice
Ctrl
Alt  OSD is opened by pressing the Alt key twice
Alt Gr  OSD is opened by pressing the Alt Gr key twice
 OSD is opened by pressing the Windows key twice
Win
Shift  OSD is opened by pressing the Shift key twice
 OSD is opened by pressing the Print key twice
Print
5. Press F2 to save your settings.
1. Click on
KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click the General
4. Under OSD via double keypress
 OSD cannot be opened via double keypress (default)
Off
Ctrl  OSD is opened by pressing the Ctrl key twice
 OSD is opened by pressing the Alt key twice
Alt
Alt Gr  OSD is opened by pressing the Alt Gr key twice
 OSD is opened by pressing the Windows key twice
Win
 OSD is opened by pressing the Shift key twice
Shift
PrtSc  OSD is opened by pressing the Print key twice
5. Click OK to save your changes.
you can also open the OSD by pressing a configured
(default) to open the on-screen display.
and press
System setup
and press
Hotkey Enter
select one of the following options:
tab.
select one of the following keys.
.
Enter
.
on the directory tree.
G&D DP-Vision-Fiber · 28
Configuration
Hot-