G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung Seite 82

Installation
Connecting the console monitor
USB 2.0 Trans.
Transmission DP Out
Connect the console monitor.
DP Out:
NOTE: One
DP Out
ants. The number behind the name of the interface assign each interface to a par-
ticular channel.
Establishing a connection to the computer module
USB 2.0 Trans.
Transmission DP Out
IMPORTANT: The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the Transmission interfaces and the cable
plugs.
Transmission|Tx: Insert the LC plug of the fibre optic cable connected to the Transmis-
sion|Rx interface of the computer module.
Transmission|Rx: Insert the LC plug of the fibre optic cable connected to the Transmis-
sion|Tx interface of the computer module.
NOTE: One
Transmission
variants. The number behind the name of the interface assign each interface to a
particular channel.
11 · G&D DP-Vision-Fiber
RS232
USB 2.0 Devices
Micro In Speaker
interface is available for every video channel of multi-channel vari-
RS232
USB 2.0 Devices
Micro In Speaker
interface is available for every video channel of multi-channel
Mouse
Generic
Keyb./Mouse Keyb. Red. Power
Mouse
Generic
Keyb./Mouse Keyb. Red. Power