Establishing The Power Supply - G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung

Installation
Establishing a connection to the user module
USB 2.0 CPU
IMPORTANT: The devices use components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the Transmission interfaces and from the
cable plug.
Transmission|Tx: Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to theTransmission|Rx interface of the
user module.
Transmission|Rx: Insert the LC plug of a fibre optic cable, which is available as acces-
sory, into this interface. Connect the other end to the Transmission|Txinterface of the
user module.
NOTE: One
Transmission
variants. The number behind the name of the interface assign each interface to a
particular channel.

Establishing the power supply

USB 2.0 CPU
Insert one of the supplied IEC cables here.
Main Power:
To provide a second, redundant power supply, connect a portable power
Red. Power:
pack to this interface.
9 · G&D DP-Vision-Fiber
USB 2.0 Trans.
In Line
DisplayPort 1
Transmission CPU
interface is available for every video channel of multi-channel
USB 2.0 Trans.
In Line
Transmission DisplayPort 1
CPU
RS232
Out Keyb./Mouse
Keyb. CPU Mouse USB CPU
Out
RS232
Out Keyb./Mouse
Keyb. CPU Mouse USB CPU
Out
Red. Power
Red. Power