Environment Conditions - Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung

TMT162
Influence of the reference
junction (internal cold
junction)
Ambient temperature
limits
Storage temperature
Altitude
Climate class
Degree of protection
Shock and vibration
resistance
Electromagnetic
compatibility (EMC)
Endress+Hauser
B: 10 μV/K at C: 20 μV/K at
1000 °C (1832 °F) 1000 °C (1832 °F)
L: 55 μV/K at 500 N: 35 μV/K at 500
°C (932 °F) °C (932 °F)
Example for calculating measured error for ambient temperature drift:
Input temperature drift Δϑ = 10 K (18 °F), Pt100, measuring range 0 to 100 °C (32 to 212 °F)
Maximum process temperature: 100 °C (212 °F)
Measured resistance value: 138.5 Ω (IEC 60751) at maximum process temperature
Typical temperature drift in Ω: (0.001% of 138.5 Ω) * 10 = 0.01385 Ω
Conversion to Kelvin: 0.01385 Ω / 0.385 Ω/K = 0.04 K (0.054 °F)
Pt100 IEC 60751 Cl. B (internal cold junction for thermocouples TC)
10.0.5

Environment conditions

• Without display: -40 to +185 °F (-40 to +85 °C)
• With display: -40 to +176 °F (-40 to +80 °C)
For use in hazardous area, see Ex certification or control drawing
At temperatures < -4 °F (-20 °C) the display may react slowly. Readability of the display
cannot be guaranteed at temperatures < -30 °C (-22 °F).
• Without display: -40 to +212 °F (-40 to +100 °C)
• With display: -40 to +176 °F (-40 to +80 °C)
Up to 6560 ft (2000 m) above sea level according to IEC 61010-1 (EN 61010-1), CSA 1010.1-92
As per IEC 60 654-1, Class C
• Aluminum die-cast or stainless steel housing IP67, NEMA 4X
• Stainless steel housing for hygienic applications (T17 housing): IP66/IP68 (1.83 m H
NEMA 4X, NEMA 6P
3g / 2 to 150 Hz as per IEC 60 068-2-6
Care should be taken when using L-form brackets (see wall/tube 2" brackets in Section
'Accessories') since this can cause resonance. Caution: vibrations at the transmitter must
not exceed the specified values.
CE Electromagnetic Compatibility Compliance
EMC meets all relevant requirements listed under EN 61326 Series and NAMUR NE21. Details as
per declaration of conformity.
This recommendation is a uniform and practical way of determining whether the devices used in
laboratories and process control are immune to interference with an objective to increase its
functional safety.
ESD (Electrostatic discharge)
Electromagnetic fields
Burst (fast transient)
D: 20 μV/K at E: 75 μV/K at 500 °C
1000 °C (1832 °F) (932 °F)
R: 12 μV/K at S: 12 μV/K at 1000
1000 °C (1832 °F) °C (1832 °F)
IEC 61000-4-2 6 kV cont., 8 kV air
IEC 61000-4-3 0.08 to 2 GHz
0.08 to 2 GHz
2 to 2.7 GHz
IEC 61000-4-4 2 kV
Technical data
J: 55 μV/K at K: 40 μV/K at
500 °C (932 °F) 500 °C (932 °F)
T: 50 μV/K at U: 60 μV/K at
100 °C (212 °F) 500 °C (932 °F)
O for 24 h),
2
10 V/m
30 V/m
1V/m
97