Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung Seite 82

Commissioning
®
Available in ReadWin 2000, HART
Commuwin II with Matrix address
Manufacturer Manufacturer's identification character: Endress+Hauser (=17)
Device type Device type identification: TMT162
Date Individual use of this parameter
Hardware Revisions of the device's electronic components
revision
®
Available in ReadWin 2000, HART
Commuwin II with Matrix address
Security Set-up release code.
locking Input:
• Lock = 0
• Release (unlock) = 261
Reset to default Reset to factory default values.
Input: 162
0
Output Activate simulation mode.
simulation Input:
• OFF
• ON
Simulation Input of the simulation value (current).
value Input: 3.58 to 23 mA as of SW version 01.03.00.
To SW version 01.03.00 21.7 mA.
User For changing the 4 or 20 mA value by ± 0.150 mA
calibration
• Trimming 4 mA
(trim) analog
• Trimming 20 mA
output
®
Available in ReadWin 2000, HART
Commuwin II with Matrix address
PV PV value
AO PV value in mA
PV % PV value in %
Sensor 1 Sensor 1 process value
Sensor 2 Sensor 2 process value
Internal Internal temperature of the device (RJ value)
temperature
(RJ value)
82
Function group IDENTIFICATION
®
handheld module DXR275/375 (Symbol
Function group SERVICE FUNCTIONS
®
handheld module DXR 275/375 (Symbol
Function group MEASURED VALUES
®
handheld module DXR275/375 (Symbol
7
®
), ReadWin
2000
-
-
-
-
7
®
), ReadWin 2000
+
+
+
+
≥ SW 01.03.00
7
®
), ReadWin 2000
+
-
-
-
-
-
TMT162
7
/FieldCare CW II-
Matrix
+ -
+ -
+ -
+ -
7
/FieldCare CW II-
Matrix
+ V9H6
+ V9H5
+ V9H7
+ V9H8
≥ SW 01.03.00
-
7
/FieldCare CW II-
Matrix
+ V0H0
+ V0H1
+ V0H2
+ V0H3
+ V0H5
+ V0H7
Endress+Hauser