Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung Seite 80

Commissioning
®
Available in ReadWin 2000, HART
Commuwin II with Matrix address
Display Activating the values to be shown on the device display:
• Display: PV
• Display: Sensor 1 value
• Display: Sensor 2 value
• Display: RJ value
• Display Analog output value
• Display: Status
• Display: Time
• Display: percentage value (on/off)
Primary value (PV) is displayed as a
percentage.
In order to activate the values to be shown in the device display using Commuwin II
®
and HART
displayed and enter the sum.
• Display: time (2s, 4s, 6s, 8s)
• Display: figures after decimal point (0,1,2)
• Display PV text (customer specific text, 8 characters)
®
Available in ReadWin 2000, HART
Commuwin II with Matrix address
Diagnostics Display of information required for device diagnostics.
• Device status or error code
(See chapter 9.2 "Error messages")
• Last error code (status) or previous error code
(See chapter 9.2 "Error messages")
• Status sensor 1 (0 = no error; 0 ≠ error)
• Status sensor 2 (0 = no error; 0 ≠ error)
• Configuration changed
80
®
handheld module DXR275/375 (Symbol
handheld module DXR275/375: Add (DXR,CW=x) of the values to be
Function group DIAGNOSTICS
®
handheld module DXR275/375 (Symbol
Function group DISPLAY
7
),
(DXR,CW=1)
(DXR,CW=2)
(DXR,CW=4)
(DXR,CW=8)
(DXR,CW=16)
(DXR,CW=32)
2s (DXR,CW=0)
4s (DXR,CW=64)
6s (DXR,CW=128)
8s (DXR,CW=192)
off (DXR,CW=0)
on (DXR,CW=64)
7
),
7
®
ReadWin 2000 /FieldCare
+ +
+ +
+ +
+ +
+ +
+ +
< SW 01.03.00 < SW 01.03.00
≥ SW 01.03.00 ≥ SW 01.03.00
≥ SW 01.03.00 ≥ SW 01.03.00
≥ SW 01.03.00 ≥ SW 01.03.00
+ +
7
®
ReadWin 2000 /FieldCare
+ +
+ +
- +
- +
+ +
TMT162
CW II-
Matrix
V6H0
V6H0
V6H0
V6H0
V6H0
V6H0
< SW
01.03.00
-
-
-
V6H1
CW II-
Matrix
• V9H0
• V9H1
• V0H4
• V0H6
• V9H2
Endress+Hauser