Installation Instructions; Incoming Acceptance, Transport, Storage; Transport And Storage; Mounting Conditions - Endress+Hauser iTEMP TMT125 Bedienungsanleitung

Installation instructions

• The device meets all the specifications of FOUNDATION Fieldbus-H1 (www.fieldbus.org).
• The device may also be operated with certified devices from other manufacturers
(interoperability).
An overview of other approvals and certificates can be found in the Operating Instructions on
CD-ROM.
3 Installation instructions
3.1

Incoming acceptance, transport, storage

3.1.1 Incoming acceptance
After receiving the goods, check the following points:
• Are the packaging or the contents damaged?
• Is the delivery complete or is anything missing? Check the scope of delivery against your
order.

3.1.2 Transport and storage

Observe the following points:
• The unit must be packed in shockproof packaging for storage (and transport).
• The permitted storage temperature is -40 to +80 °C (-40 to 176 °F).
3.2

Mounting conditions

3.2.1 Dimensions
• DIN rail device: 217 mm (8.54") x 100 mm (3.94") x 60 mm (2.36") (BxHxD)
• Field housing: 258 mm (10.16") x 140 mm (5.51") x 84 mm (3.31") (BxHxD)
3.2.2 Mounting point
• Ambient temperature (both versions): -40 to 70 °C (-40 to 158 °F).
• Relative humidity: 95% not condensing (valid for the DIN rail version)
• Climate class: meets the requirements regarding class C1-C3 in accordance with
IEC 60721-4-3
!
Note!
Mounting must only be performed by specialist who are trained specifically for this purpose.
Recognized rules of the technology and setup requirements must be maintained during
mounting and dismounting. Especially for tasks on electrical systems, special safety requirements
must be observed.
26
TMT125
Endress+Hauser