Identification; Unit Identification; Delivery Contents; Certificates And Approvals - Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung

Identification

60
2 Identification
2.1

Unit identification

2.1.1 Legend plate
Fig. 1: Example: Field transmitter legend plate
2.2

Delivery contents

The scope of delivery of the field transmitter is as follows:
• Temperature field transmitter
• Entry blank
• Mulitlanguage Brief Operating Instructions as hard copy
• Operating instructions on CD-ROM
• Additional documentation for devices that are suitable for use in hazardous areas (
such as Safety Instructions (XA...), Control or Installation Drawings (ZD...).
2.3

Certificates and approvals

CE Mark, declaration of conformity
The device is designed to meet state-of-the-art safety requirements, has been tested and left the
factory in a condition in which they are safe to operate. The device complies with the applicable
standards and regulations in accordance with IEC 61010 "Protection Measures for Electrical
Equipment for Measurement, Control, Regulation and Laboratory Procedures" and with the EMC
requirements of IEC 61326. The measuring system described in these Operating Instructions
complies with the statutory requirements of the EC Directives. The manufacturer confirms
successful testing of the device by affixing the CE mark.
UL recognized component to UL 3111-1
CSA GP approved
GL German Lloyd marine approval
GL Type Approval for temperature measurements in hazardous locations on GL Classed Vessels,
Marine and Offshore Installations.
2.4

Registered trademarks

®
• HART
Registered trademarks of HART
®
• Microsoft Windows NT
1 Order code and series number of the device
2 Protection and approvals
3 Power supply and output signal
4 Ambient temperature; for Ex area,
see Ex-certification or Control Drawing
5 Approvals with symbols
â
Ó
®
Communication Foundation, Austin, TX, USA
® ®
, Windows 2000 and Windows
0 2 1
®
XP
Endress+Hauser
TMT162
),