Operation; Display And Operating Elements; Display Indication; Display Icons - Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung

Operation

68
5 Operation
5.1

Display and operating elements

5.1.1

Display indication

Fig. 7: LC display in the field transmitter (illuminated, can be plugged-in in 90° steps)
5.1.2

Display icons

Pos. Function
no.
1 Bargraph display
2 Display 'Warning'
3 Engineering unit display K, °F, °C or %
4 Measured value display
(0.81" / 20.5 mm character size)
5 Status and information display
6 Display "Communication"
7 Display "Configuration locked"
50
40 60
30 70
!
°C %
K °F
20 80
10 90
0 100
Description
In 10% steps with overrange and underrange marks. The
bargraph display flashes when an error occurs.
This display mode appears when an error occurs or a
warning is given
Engineering unit for the measured value being displayed
Measured value display. If a warning is present this display
alternates between the measured value and the warning
code. In the event of an error, the error code is dispalyed
instead of the measured value.
Display of which value is being indicated on the display.
On PV a customer specific text can be entered. On
warning, the display shows the warning code as well as
"WARN". On faults the display shows "ALARM".
The communication icon appears on read or write access
using the HART
If the software or hardware setup/configuration is locked,
the "Configuration locked" icon appears.
TMT162
Ê
Ë
Ì
Í
Î
Ï
Ð
®
protocol
Endress+Hauser