Commissioning; Installation Check; Switch On The Device; Quick Setup - Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung

Commissioning

74
6 Commissioning
6.1

Installation check

Before commissioning the measurement point make sure that all final checks have been carried out:
• Checklist "Installation check"
• "Connection check"
6.2

Switch on the device

Once the power has been connected, the field transmitter is operational.
6.3

Quick Setup

Using the Quick Setup the operator is led through all the most important unit functions, which must
be set up for standard measurement operation of the unit.
Standard setup
®
Available in ReadWin 2000, HART
7
DXR275/375 (Symbol ), Commuwin II with Matrix address
Function mode
PV mode
PV unit
Sensor 1
Sensor type
Sensor connection
Measuring unit
Sensor 2
Sensor type
Sensor connection
Measuring unit
Output
PV lower range value
PV upper range value
Safety settings
Fault condition
Ambient alert
®
handheld module ReadWin
2000
+
+
+
+
+
+
+
+
+
+
+
+
+
TMT162
7
®
/FieldCare CW II-Matrix
+ V1H1
+ V1H2
+ V1H3
+ V3H0
+ V3H1
+ V3H6
+ V4H0
+ V4H1
+ V4H6
+ V1H4
+ V1H5
+ V1H8
+ V2H2
Endress+Hauser