Parkside PAKG 40-Li A1 Originalbetriebsanleitung Seite 29

See fold-out page (Figure S).
■
Note
Remove thicker branches with a branch cutter.
►
10.7. Working with the pole pruner
Sawing techniques
WARNING!
Watch out for falling clippings.
►
Be aware of the danger of branches whipping back.
►
Note
Place the bumper spike (58) on the branch. This will help
►
you work more safely and quietly.
Now you can begin sawing.
►
Sawing off small branches
Saw small branches (Ø 0 – 8 cm) from the top down
♦
(see figure).
|
22 English
Sawing off larger branches
Before sawing larger branches (Ø 8 – 25 cm), first make a
♦
relief cut (see figure). A relief cut also prevents peeling
of the bark on the main trunk.
Saw from the top
♦
Saw in sections
Trim long or thick branches before you make the final cut
(see figure).
c b
10.8. Working safely
Keep the tool, cutting mechanism and guard (24) in
■
good condition to prevent injury.
If the tool has been dropped, check for significant damage
■
or defects.
Observe the specified working angle max. 60°±10° to en-
■
sure safe working (see figure).
max. 60°±10°
Do not use the tool while standing on a ladder or with
■
unsteady footing.
Do not be tempted into making a poorly considered cut.
■
You could endanger yourself and others.
to the bottom .
2
1
a