Inhaltsverzeichnis
Werbung
Changing the oven
light bulbs on the
left or right
Method
Seal
Accessories
88
If an oven light bulb fails, it must be replaced.
Heat resistant replacement bulbs can be obtained
from the after sales service or specialist shops.
Only use these bulbs.
1. Switch off the circuit breaker in the fuse box.
2. Place a tea towel in the cold oven to prevent
damage.
3. Unscrew the glass cover by turning it
anti clockwise.
4. Replace the oven light bulb with a bulb of the
same type.
5. Screw on the glass cover again.
6. Remove the tea towel and switch the circuit
breaker back on.
Clean the seal on the oven with washing up liquid.
Never use caustic or abrasive detergents.
Immediately after use, soak the accessories in
washing up liquid. Food residues can then be easily
removed with a brush or sponge.
Werbung
Kapitel
Inhaltsverzeichnis
