Mechanical Installation; Important Notes; Standard Devices In The Power Range 15; Mounting With Fixing Brackets (Standard) - Lenze 8200 vector Montageanleitung

4

Mechanical installation

4.1

Important notes

J
Warnings!
The scope of supply of the controller includes a label with the following text:
"Suitable for use on a circuit capable of delivering not more than ...".
If the controller is used in systems in accordance with UL, stick this label on the
controller before mounting. Select the position so that no ventilation hole and
no cooling ribs are covered.
The accessory kit is located inside the controller.
Remove the cover of the drive controller
1
0
4.2 Standard devices in the power range 15 ... 30 kW
4.2.1

Mounting with fixing brackets (standard)

Mounting material required from the scope of supply:
Description
Fixing bracket
Raised countersunk head screw
M5 × 10 mm (DIN 966)
EDK82EV903 DE/EN/FR 4.0
Mechanical installation
Mounting with fixing brackets (standard)
1. Remove the screws 0
2. Lift cover 1 up and detach it
9300vec113
Use
Drive controller fixing
Mounting of fixing bracket to the drive controller
l
Important notes
Quantity
4
4
4
125