Lenze 8200 vector Montageanleitung Seite 105

E82EV753K4B ... E82EV903K4B
(fold−out page on the right)
Scope of supply and connections
Position Description
0
8200 vector frequency inverter
1
Fixing bracket for standard mounting
2
Blanking covers (2 pieces) for interfaces FIF I and FIF II
3
EMC shield sheet with fixing screws for shielded control cables
4
Cover with fixing screws
5
Shield clamp and strain relief for the motor cable
6
Strain relief for the protective earth cable of the motor and the incoming cable of the motor tempera-
ture monitoring with PTC thermistor (PTC) or thermal contact (NC contact)
7
Label (required for mounting in accordance with UL)
T1, T2 PTC connection or thermal contact (NC contact) of the motor
U, V, W, PE Motor connection
L1, L2, L3, PE Mains connection
+U , −U DC supply
G G
X1.2 Terminal strip for connection of relay output K1
X1.3 Terminal strip for connection of relay output K2
X3.1 Terminal strip for connection of relay output K
EDK82EV903 DE/EN/FR 4.0
for "safe standstill" (only for variant Bx4x)
SR
l
^ 141
^ 171
^ 149
^ 161
^ 125
^ 161
^ 161
^ 158
^ 162
^ 164
105