REDCAT SIXTYFOUR RER32894 Benutzerhandbuch Seite 26

R P
ADIO ROGRAMMING
Function Settings
Mixes:
This function is used to create a mix between channels. For example if at low throttle some
automated wheel movement was desired then it is possible to create a mix to do this. This
system can have up to 3 different mixes.
1. Use the "UP" and "DOWN" keys to select a mix.
2. Use the "OK" key to change between settings.
3. Select a master channel, this channel will control the slave channel.
4. Select a slave channel to be controlled by the master.
5. Set the positive and negative mix. This setting controls how much the slave channel will move in relation to the masters movement. If
the value is set to 50%, the slave channel will move half the amount of the master channel.
6. Set the offset. The offset changes the center of the slave channel in relation to the master.
7. Hold the "CANCEL" key to save and return to the previous menu.
8. To return a setting to default, press and hold the "OK" key for 3 seconds. Press and hold the "CANCEL" key to save.
TM
25