Front Lift - Redcat Sixtyfour Rer32894 Benutzerhandbuch

R P
ADIO
Transmitter Components
Channel 3

Front Lift

Channel 2 (Throttle)
Throttle Trim
Up
Down
Bind
Sixty-Four Hopper function
Steering. Move left to turn left, move right to turn right.
Channel 1:
Channel 2: Throttle. Move up to drive forward. Move down to apply brake and drive in reverse.
Channel 3: Raises/Lowers both front wheels.
Channel 4: Not used.
Channel 5: Raises/Lowers left rear wheel.
Raises/Lowers right rear wheel.
Channel 6:
Steering Trim: See radio adjustments section.
Throttle Trim: See radio adjustments section.
Front Lift: Lifts front of car to full height. Used for hopping.
Rear Lift: Lifts rear of car to full height.
Drops front of car to lowest position.
Front Lower:
Rear Lower: Drops rear of car to lowest position.
LCD: Displays important radio information and parameters.
Bind: Used to bind radio to receiver. See the Binding Process section.
Up: Used to move selection cursor.
Used to move selection cursor.
Down:
OK: Used to select an option.
Cancel/Save: Press to cancel a setting. Press and hold for three seconds to save a setting.
ON/OFF: Switch used to turn the transmitter on or off.
Caution: For best signal quality, ensure that the receiver is mounted away from motors or metal parts.
Caution: Do not pull or tie the receiver antenna into a knot. Never cut the receiver antenna.
ROGRAMMING
Front Lower
Channel 4
Antenna
Rear Lower
LCD
TM
20
Channel 5
Channel 6
Rear Lift
Channel 1 (Steering)
Steering Trim
OK
Cancel / Save
ON/OFF